Download Print this page

Gefen HD-SDI User Manual

4x2 hd-sdi switcher

Advertisement

Quick Links

4x2 HD-SDI
Switcher
U S E R
M A N U A L
www.gefen.com

Advertisement

loading

Summary of Contents for Gefen HD-SDI

  • Page 1 4x2 HD-SDI Switcher U S E R M A N U A L www.gefen.com...
  • Page 3 6265 Variel Ave. Woodland Hills, CA 91367-9897 Notice Gefen Inc. reserves the right to make changes in the hard ware, packaging and any accompanying doc u men ta tion without prior written notice. 4x2 HD-SDI Switcher is a trademark of Gefen Inc.
  • Page 4: Table Of Contents

    TABLE OF CONTENTS Introduction Features Panel Desciptions Connecting and Operating the 4x2 HD-SDI Switcher RMT4-IR Installation Specifi cations Warranty...
  • Page 5: Introduction

    How it Works Connect your HD-SDI sources and the one or two HD-SDI displays to the 4x2 HD-SDI Switcher. When all the equipment is powered and connected, switching can begin. The ex•tend•it line offers solutions for noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.
  • Page 6: Features

    • Saves time—switch between sources in an instant using the RMT-4 IR remote. Installs in seconds • Lifetime support—includes one-year manufacturer’s warranty and free technical support for the lifetime of the product Includes: 4x2 HD-SDI Switcher One 5v Power Supply RMT-4 IR remote control...
  • Page 7 PANEL DESCRIPTIONS SDI Out 1 SDI Out 2 Connects to 5VDC powersupply SDI In 4 SDI In 1 SDI In 2 SDI In 3...
  • Page 8: Connecting And Operating The 4X2 Hd-Sdi Switcher

    CONNECTING AND OPERATING THE 4X2 HD-SDI SWITCHER How to Connect the 4x2 HD-SDI Switcher to your devices 1 Connect your HD-SDI inputs into Input 1 thru 4 on the 4x2 HD-SDI Switcher. 2 Connect one or two displays into the outputs.
  • Page 9: Rmt4-Ir Installation

    RMT4-IR INSTALLATION 1. Remove battery cover from the back of the RMT4-IR remote. 2. Verify that dip switches 1 & 2 are in the down (OFF) position. 3. Insert the battery, hold the battery so that you can see the positive side facing up. The side that is not marked must be facing down.
  • Page 10: Specifi Cations

    SPECIFICATIONS • Input/Output: SDI - SMPTE 259M-C (270Mbps);HD-SDI - SMPTE 292M (1.485, 1.485/ 1.001 Gbps); NTSC; PAL: 720p @ 60, 59.94, 50Hz 1080p @ 30, 29.97, 25, 24 & 23.98Hz, 1080i @ 60, 59.94, 50, 48 & 47.95Hz • Power Supply: 5VDC •...
  • Page 11: Warranty

    If equipment fails because of such defects and Gefen Inc. is notifi ed within two (2) year from the date of shipment, Gefen Inc. will, at its option repair or replace the equipment, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifi...
  • Page 16 6265 Variel Avenue Woodland Hills, CA 91367 1-800-545-6900 818-884-6294 fax: 818-884-3108 www.gefen.com gsinfo@gefen.com...

This manual is also suitable for:

4x2 hd-sdi switcher