Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Gefen 4x1 DVI DL
Summary of Contents for Gefen 4x1 DVI DL
- Page 1 4x1 DVI DL Switcher with Serial Option U S E R M A N U A L www.gefen.com...
- Page 2 Woodland Hills, CA 91367-9897 Notice Gefen Inc. reserves the right to make changes in the hard ware, packaging and any accompanying doc u men ta tion without prior written notice. 4x1 DVI DL Switcher is a trademark of Gefen Inc.
-
Page 3: Table Of Contents
TABLE OF CONTENTS Introduction Features Panel Desciptions Connecting and Operating the 4x1 DVI DL Switcher RMT4-IR Installation Dip Switch Guide RS-232 Interface Specifi cations Warranty... -
Page 4: Introduction
Our Commitment Gefen will always offer the fi nest quality product at the best possible price. Included in that price is a lifetime of free support from a team of outstanding engineers. Now you can switch easily and reliably between any combination of four dual link DVI &... -
Page 5: Features
• Supports DDWG standards for DVI monitors • Installs in minutes • Includes Rack Ears Includes: (1) 4x1 DVI DL Switcher (1) 5V DC Power Supply (1) RMT4-IR Remote Control (4) 6ft Dual Link DVI cables (4) 6ft USB cables... -
Page 6: Panel Desciptions
PANEL DESCRIPTIONS... -
Page 7: Connecting And Operating The 4X1 Dvi Dl Switcher
If you loose your picture when you switch between sources you will need a DVI Detective. The 4x1 DVI DL Switcher is Dual Link ONLY. To switch between Dual Link and Single Link sources, a Single Link cable (sold separately) must be used for each... -
Page 8: Rmt4-Ir Installation
RMT4-IR Installation 1. Remove battery cover from the back of the RMT4-IR remote. 2. Verify that dip switches 1 & 2 are in the down (OFF) position. 3. Insert the battery, hold the battery so that you can see the positive side facing up. The side that is not marked must be facing down. -
Page 9: Dip Switch Guide
4x1 DVI DL Switcher. To change the IR code on the 4x1 DVI DL Switcher, look under the unit and fi nd a silver sticker. Beneath this sticker is a group of 4 dip switches. The fi rst 2 switches (labelled 1 and 2) correspond to the 2 switches found on the RMT4-IR remote control. -
Page 10: Rs-232 Interface
RS-232 INTERFACE Binary Table ASCII Corresponding Binary RMT4-IR Button 0011 0001 0011 0010 0011 0011 0011 0100 RS-232 Settings Bits per second ...................... 19200 Data bits ......................... 8 Parity ........................None Stop bits ..........................1 Flow Control ......................None... -
Page 11: Specifi Cations
SPECIFICATIONS Video Amplifi er Bandwidth ................2x 1.65 Gbps Input Video Signals ..................1.2 volts p-p Input DDC Signal ..................5 volts p-p (TTL) Dual Link Range ..................3840 x 2400 DVI Input/Output Connector Type ..........DVI-I (only digital signals) USB 2.0 Input Connection ................... -
Page 12: Warranty
If equipment fails because of such defects and Gefen Inc. is notifi ed within two (2) year from the date of shipment, Gefen Inc. will, at its option, repair or replace the equipment, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifi... - Page 13 6265 Variel Avenue Woodland Hills, CA 91367 1-800-545-6900 818-884-6294 fax: 818-884-3108 www.gefen.com gsinfo@gefen.com...
Need help?
Do you have a question about the 4x1 DVI DL and is the answer not in the manual?
Questions and answers