Default Settings In The Control Computer - Danfoss DHP-AX User Manual

12

Default settings in the control computer

The first column in the table below shows the parameters that can be adjusted by
the User. The second column shows settings made at the factory, and the third col-
umn the settings made by the installation contractor in connection with installation
of the heat pump.
Make sure that the installation contractor enters any settings made during installa-
tion that are particular to your heat pump. This will make it easier for you when you
make your own adjustments.
Setting
ROOM
OPERAT.
CURVE
MIN
MAX
CURVE 5
CURVE 0
CURVE -5
HEAT STOP
DHP-AX – 42
Factory setting
20°C
AUTO
40°C
10°C
55°C
0°C
0°C
0°C
17°C
VUBMI102
Any customer specific settings