Danfoss DHP-AX User Manual page 37

E
NOTE! Have a cloth to hand when opening the strainer cover as a small
amount of water usually escapes.
To clean the strainer:
1 Switch off the heat pump.
2 Turn the shut-off cock to the closed position (see figure above).
3 Unscrew the cover and remove it.
4 Remove the strainer.
5 Rinse the strainer.
6 Reinstall the strainer.
7 Check that the o-ring on the cover is not damaged.
8 Screw the cover back into place.
9 Turn the shut-off cock to the open position.
10 Start the heat pump.
Shut-off valve
Figure 15: Shut-off cock and strainer on the return line.
VUBMI102
Strainer
O-ring
Cover
DHP-AX – 37