Table of Contents
Advertisement
Menu text
POOL HYSTERESIS
(Only displayed if
an Expansion card is
installed)
5.1.3
Sub menu HEAT CURVE 2
The menu only applies if the expansion card is
installed and only appears if shunt group sensor is
connected and activated. Used to change settings
for heat curve 2.
Menu text
CURVE 2
MIN
MAX
Description
The temperature range between start
and stop for the pool's heat production.
Description
Calculated shunt group temperature
at 0°C outdoor temperature. Shown as
a graph that also shows MIN and MAX
values.
Minimum permitted shunt group tempe-
rature, if the temperature for heat stop
has not been reached.
Maximum permitted shunt group tem-
perature.
VUBMI102
Adjusted by:
Authorized installer.
Adjusted for each instal-
lation.
HEAT CURVE 2
CURVE 2
MIN
MAX
Adjusted by:
By the customer, if
necessary.
Authorized installer.
Adjusted for each instal-
lation.
Authorized installer.
Adjusted for each instal-
lation.
40°C
10°C
55°C
DHP-AX – 25
Advertisement
Table of Contents
