Table of Contents
Advertisement
7.6
Setting HEAT STOP
To change HEAT STOP:
1
Press either the right or left button once to open the INFORMATION menu.
The cursor is in the OPERAT. menu option.
2
Press the down button to move the cursor to the HEAT CURVE menu option.
3
Open the menu by pressing the right button once. The cursor is at the CURVE
value.
4
Press the down button to move the cursor to HEAT STOP.
5
Open your selection by pressing the right button once. The text row HEAT
STOP is marked.
6
Raise or reduce the value with the up or down buttons.
7
Press the left button three times to exit the menu.
7.7
Reading off temperatures
Reading off the hot water temperature (if a water heater is installed).
1
Press either the right or left button once to open the INFORMATION menu.
The cursor is in the OPERAT. menu option.
2
Press the down button to move the cursor to the TEMPERATURE menu option.
3
Open your selection by pressing the right button once.
4
Press the down button to move the cursor to HOT WATER. The value shown at
the HOT WATER menu option is the hot water's current value.
5
Open your selection by pressing the right button once. A graph of the hot
water temperature over the last hour is shown.
6
Press the left button three times to exit the menu.
To view the TEMPERATURE history:
1
Press either the right or left button once to open the INFORMATION menu.
The cursor is in the OPERAT. menu option.
2
Press the down button to move the cursor to the TEMPERATURE menu option.
3
Open the menu by pressing the right button once.
4
The cursor is at the OUTDOOR value.
5
Press the up or down button to move the cursor to the desired value.
6
Open your selection by pressing the right button once. A graph appears in the
display.
7
Move the cursor along the time axis using the up (plus) or down (minus) but-
tons. An exact value at the relevant time is shown at the top of the display.
8
Press the left button three times to exit the menu.
VUBMI102
DHP-AX – 33
Advertisement
Table of Contents
