Table of Contents
Advertisement
Commissioning
5.5
Adjusting the indoor temperature
Comfort adjustment, to change temperature
On the start screen, "comfort adjustment" of the indoor temperature may be done very easily.
5.6
Adjusting the Heat Curve
The Curve indicator has two modes that can be toggled by pressing the Curve indicator symbol.
When lit, the curve is adjusted as one unit.
40
When not lit, individual curve points can be moved separately.
40
16
DHP-H Varius Pro+/DHP-L Varius Pro+
Press
or
, alternatively drag clockwise or anticlockwise to raise or lower the temperature.
Each step represents an increase/decrease of approximately 1°C of the indoor temperature depend-
ing on comfort factor settings.
1. Press
on the Start screen to open the Menu screen.
2. Press
3. Press
if the Heat curve is not shown.
4. There are two ways of adjusting the heat curve:
▪ If the Curve indicator
Or:
▪ If the Curve indicator
and
to the desired temperature.
5. Confirm the new selection by pressing
VIJSG202
is lit, press
or
to adjust the entire curve.
40
is not lit individual points can be moved separately by pressing
40
Danfoss Heating Solutions
Advertisement
Table of Contents
Need help?
Do you have a question about the DHP-H Varius Pro+ and is the answer not in the manual?
Questions and answers