Removing The Vga Card - EUROCOM P180HM Service Manual

Disassembly

Removing the VGA Card

Figure 14
VGA Card Removal
1. Turn off the computer, and turn it over and remove the battery
2. The VGA card will be visible at point
a. Locate the VGA cards.
3. Remove screws
b. Remove the screws.
4. Remove the heat sink unit
c. Remove the heat sink
5. Remove screws
d. Remove the screws
6. Carefully remove the video cards
e. Remove the VGA cards.
7. If your system includes two video cards you will need to disconnect the cable
cards (do not forget to reconnect the cable if you are replacing two cards)
a.
b.

6. VGA Card Heatsink
9. VGA Card Module
• 12 Screws
2 - 18 Removing the VGA Card
1
-
in the order indicated on the label (and on the heat sink unit itself).
2 5
(two heat sink units are pictured here).
6
& from the video card (two video cards are pictured).
7 8
.
9
1
2
2 3 3
4 5 4 5
(page 2 - 5) and component bay cover
on the mainboard (Figure 16a).
c.
d.
6 6
e.
(page 2 -
between the master and slave
10
.
7 8 7 8
9 9
10
5).