Troubleshooting; Error & Status Messages On The Control Panel - Lanier AP4510 Setup Manual

Error & Status Messages on the Control
Panel
❖ ❖ ❖ ❖ Status Messages
Messages/Second messages
Energy Save Mode
Hex Dump Mode
Loading Toner...
Offline
Printing...
Processing...
Ready
Resetting Job...
Waiting...
Warming Up...

5. Troubleshooting

The printer is in Energy Saver (low-power) mode. No action is
required.
The printer receives data in hexadecimal numbers in Hex
Dump mode. Turn off the printer after printing, and then turn
back on.
The printer is loading toner. Wait until "Ready" appears on the
panel display.
The printer is offline. Set the printer online by pressing { { { { On
Line} } } } to start printing.
The printer is making prints. Wait for a while.
The printer is processing the print job. Wait for a while.
The default ready message. The printer is ready for use. No ac-
tion is required.
The printer is resetting the print job. Wait until "Ready" ap-
pears on the panel display.
The printer is waiting for the next data to print. Wait for a
while.
The printer is warming up and not ready. Wait until "Ready"
appears on the panel display.
Status
55