Lanier AP4510 Setup Manual page 132

Troubleshooting
Messages/Second messages
Collate Cancelled
Driver Setting Error (Memo-
ry)
Duplex Cancelled
Exceeded Max. Pages (Col-
5
late)
Exceeded Max. Stored Files
Exceeded Max. Stored Pages
Hardware Problem DIMM
Hardware Problem
Ethernet
Hardware Problem
Finisher
58
Description
The collate feature has been
canceled.
The actual amount of memory
installed does not match the
setting of printer driver. The
current print job has been can-
celed.
Duplex Print has been can-
celed.
An error has occurred in the
collation table overflow.
The Sample Print job or the
Locked Print job to be sent
from the computer will cause
the maximum number of files
to be exceeded.
The Sample Print job or the
Locked Print job to be sent
from the computer will cause
the maximum number of stor-
able pages to be exceeded.
An error has occurred in the
printer.
An error has occurred in the
Ethernet Board.
An error has occurred in the
Finisher.
Solution
To print the image correctly,
add memory to the printer, or
reduce the resolution of the
image.
Configure the memory size
correctly from the printer
driver.
To print the image correctly,
add memory to the printer, or
reduce the resolution of the
image.
Load paper into the tray indi-
cated.
To print the image correctly,
add memory to the printer, or
reduce the resolution of the
image.
Delete the stored files.
Reduce the number of pages
to print.
First, turn the power switch
off and then on. If the message
appears again, call your sales
or service representative.
First, turn off the power
switch and then on. If the mes-
sage appears again, call your
sales or service representative.
First, turn the power switch
off and then on. If the message
appears again, call your sales
or service representative.