Lanier AP4510 Setup Manual page 131

Messages/Second messages
Change Setting
Tray #
/Paper Size
Paper Type
Check Duplex
Unit Cable
Close BridgeUnit
Left Cover
Close BridgeUnit
Middle Cover
Close BridgeUnit
Right Cover
Close Duplex
Unit Cover
Close
Finisher Cover
Close
Front Cover
Close Lower
Right Cover
Close
Mailbox Cover
Close Mailbox
Front Cover
Close Mailbox
Upper Cover
Close
Right Cover
Error & Status Messages on the Control Panel
Description
The paper type and size set-
ting on the tray differs from
that of actual paper type and
size in the tray.
#: tray number
The Duplex Unit cable is not
connected properly.
The left cover of the Bridge
Unit is not closed securely.
The middle cover of the
Bridge Unit is not closed se-
curely.
The right cover of the Bridge
Unit is not closed securely.
The cover of the Duplex Unit
is open.
The front cover for the Finish-
er SR730 or the upper cov-
er/front cover for the Finisher
SR720 is open.
The front cover is open.
The lower vertical paper feed
cover is open.
The cover of the Mailbox is
open.
The front cover of the Mailbox
is open.
The upper cover of the Mail-
box is open.
The right cover or the upper
vertical paper feed cover is
open.
Solution
Load { paper size and type }
paper with the selected feed
direction into tray. Printing
will not automatically resume
if the paper type, size and di-
rection setting is incorrect.
There are two methods to
resume printing.
A
Use the control panel to set
the correct paper type, size
and direction of the paper
in tray.
B Press { { { { Form Feed} } } } and se-
lect the tray with the con-
trol panel.
Connect it properly.
Close the cover securely.
Close the cover securely.
Close the cover securely.
Close the cover of the Duplex
Unit.
Close the cover.
Close the front cover.
Close the lower vertical paper
feed cover.
Close the cover of the Mail-
box.
Close the cover securely.
Close the cover securely.
Close the cover.
5
57