Windows 95/98/Me Configuration; Configuring Windows 95/98/Me; Printing Without A Print Server; Printing With A Windows 2000 Or Windows Nt Print Server - Lanier AP4510 Setup Manual

Configuring Windows 95/98/Me

Printing without a Print Server

The following procedure describes how to configure Windows 95/98/Me to use
the machine on a network without a Windows 2000 Server, Windows 2000 Pro-
fessional, Windows NT Server, Windows NT Workstation, or NetWare based
print server.
indicates topics explained in this document
1. Specify the protocol to use
Consult your network administrator about which of the three protocols is appropriate.
TCP/IP
2. Configure the chosen protocol
"Configuring TCP/IP and IPP for Printing"
3. Select the appropriate software
4. Install the software and set the printer driver port
"Using
for Client

Printing with a Windows 2000 or Windows NT Print Server

See p.10 "Setting Up a Client Computer" for configuring Windows 95/98/Me
with a Windows 2000 or Windows NT print server.
1. Windows 95/98/Me
IPP
If using the printer...
SmartNetMonitor
for Client
SmartNetMonitor
"
Configuration
NetBEUI
"Configuring NetBEUI
for Printing"
1