Lanier AP4510 Setup Manual page 193

Menu
Edge Smoothing
Resolution
Toner Saving
Spool Printing
You can set whether Edge Smoothing is enabled. When it is on,
jagged lines appear more smoothly. Set it to off when the print im-
age contains fine gradation in tone.
• On
• Off
Note
❒ Default: Off
❒ If "Toner Saving" is "On", "Edge Smoothing" is ignored even if
it is "On".
You can set the print resolution in dots per inch.
❖ ❖ ❖ ❖ PCL
300 dpi, 600 dpi
❖ ❖ ❖ ❖ PS
300 dpi, 600 dpi
❖ ❖ ❖ ❖ TIFF
200 dpi, 300 dpi, 400 dpi, 600 dpi
Note
❒ Default: 600 dpi
You can select whether or not Toner Saving is enabled.
• On
• Off
Note
❒ Default: Off
❒ If "Toner Saving" is "On", "Edge Smoothing" is ignored even if
it is "On".
When "On" is selected, the entire print data is spooled to the Print-
er Hard Disk before printing.
• On
• Off
Note
❒ Default: Off
Limitation
❒ "Spool Printing" does not appear unless the optional Printer
Hard Disk is installed.
Description
System Menu
6
119