Replacing The Toner Bottle - Lanier AP4510 Setup Manual

Replacing the Toner Bottle

R WARNING:
• Do not incinerate toner (used
or unused) or toner contain-
ers. Toner dust is flammable
and might ignite when ex-
posed to an open flame.
• Disposal should take place at
an authorized dealer or appro-
priate collection site.
• If you dispose of the used ton-
er containers yourself, follow
local regulations.
R CAUTION:
• The inside of the machine be-
comes very hot. Do not touch the
parts with a label indicating " v "
(means hot surface). Touching
" v " (means hot surface) could
result in a burn.
• Do not eat or swallow toner.
• Keep toner (used or unused) and
toner containers out of reach of
children.
• Our products are engineered to
meet the highest standards of
quality and functionality. When
purchasing expendable sup-
plies, we recommend using only
those specified by an authorized
dealer.
When "Toner is Almost Empty" ap-
pears on the panel display, the toner
is almost empty. Prepare a new toner
bottle. If the image density is too
light, replace the old toner bottle with
a new one.
When "Replace Toner Bottle" ap-
pears on the panel display, the toner
bottle is empty. Prepare a new toner
bottle and replace the old toner bottle
with a new one.
Replacing the Toner Bottle
Note
❒ The actual number of printed pag-
es you get from a particular toner
bottle depends on the type and
size of paper you are using, the
contents of your print images, and
printing environment conditions.
A A A A
Open the front cover.
B B B B
Remove the tape on the develop-
ment unit.
C C C C
Lift the green handle.
5
97