Changing The Maintenance Menu - Lanier AP4510 Setup Manual

Menu
Menu Protect

Changing the Maintenance Menu

Protecting menu
A A A A
Check if the On Line indicator is on. If not, press { { { { On Line} } } } to enter the
"Ready" condition.
B B B B
Press { { { { Enter #} } } } , then { { { { Escape} } } } , and then { { { { Menu} } } } .
"Menu" appears on the panel display.
C C C C
Press { { { { U U U U } } } } or { { { { T T T T } } } } to display the "Maintenance" menu, and then press { { { { Enter
#} } } } .
The following message appears on the panel display.
Maintenance:
Image Density
This procedure lets you protect menu settings against accidental
changes. It makes it impossible to change the menu settings you
make with the normal procedure unless you perform the required
key operation. In a network environment, protecting settings re-
stricts changes to menu settings to network administrators.
• Level 1
• Level 2
• Off
Note
❒ Default: Off
❒ While the printer is Online, press { { { { Enter #} } } } , and then press { { { { Es-
cape} } } } , finally press { { { { Menu} } } } . You can access the "Menu Protect"
menu on the panel display.
Maintenance Menu
Description
6
113