Refilling With Staples
Refill with staples according to the following procedures when the staples in the stapler of the finisher and saddle stitch
unit run out.
P.45 "Refilling Finisher MJ-1027 / Saddle Stitch Finisher MJ-1028 staples"
P.46 "Refilling Saddle Stitch Finisher MJ-1029 staples"
P.48 "Refilling saddle stitch unit staples"
Refilling Finisher MJ-1027 / Saddle Stitch Finisher MJ-1028 staples
1
Open the front cover of the finisher.
2
Lower the lever of the stapler to release the lock, and
then take out the staple cartridge.
3
Take the empty staple case out of the staple cartridge.
4
Fit a new staple case on the staple cartridge.
Push the staple case into the cartridge until it clicks.
In this step, do not remove the seal bundling the staples.
1 TROUBLESHOOTING FOR THE HARDWARE
1
Refilling With Staples
2
45