Clearing A Paper Misfeed; Locating A Paper Misfeed - Toshiba E-studio 556 Troubleshooting Manual

Clearing a Paper Misfeed

Locating a paper misfeed

The equipment stops copying when the original or copy paper is misfed. Paper misfeeds are notified on the touch panel as
follows:
The paper misfeed symbol helps you locate the paper misfeed.
1 2
13
1. Finisher (optional) (
2. Inserter (optional) (
3. Reversing Automatic Document Feeder (lower) (
4. Reversing Automatic Document Feeder (upper) (
5. Inside of the equipment (paper exit area) (
6. Inside of the equipment (paper transport area) (
7. Bypass tray ( P.18)
8. External Large Capacity Feeder (optional) (
9. Inside of the equipment (paper feed area) (
10. Inside of the equipment (duplexing unit area) (
11. Drawers ( P.17)or tandem large capacity feeder (
12. Inside of the equipment (reversing area) (
13. Saddle stitch unit (optional) (
The picture of the hardware device shown on the touch panel differs depending on the finisher options installed.
Paper misfeed symbols
3 4 5 6
12 11 10 9 8
P.20) or Hole Punch Unit (optional) (
P.20)
P.25)
P.19)
P.25)
P.25)
P.20)
1 TROUBLESHOOTING FOR THE HARDWARE
7
P.20)
P.15)
P.16)
P.25)
P.25)
P.18)
Error code
Error message
Guidance for
clearing paper misfeeds

Clearing a Paper Misfeed

13