Paper Misfeed Inside Of The Equipment - Toshiba E-studio 556 Troubleshooting Manual

1.TROUBLESHOOTING FOR THE HARDWARE
28
Remove the misfed paper.
29
Close the paper exit cover of the saddle stitch unit and the lower cover of the Saddle
Stitch Finisher.
30
Connect the finisher to the equipment.
Connect the finisher with the equipment while pressing the lock lever.
Place your hand on portion A in the figure and then move the finisher
carefully.
Be careful not to let your fingers be caught between the
finisher and the equipment.

Paper misfeed inside of the equipment

Be careful not to let your fingers be caught between the equipment and the External Large Capacity Feeder.
1
When the External Large Capacity Feeder (optional)
is installed, operate the lever on the External Large
Capacity Feeder and separate it from the equipment.
2
Open the paper feeder cover on the lower right of the
equipment.
1 TROUBLESHOOTING FOR THE HARDWARE
A
Clearing a Paper Misfeed 25