Toshiba E-studio 556 Troubleshooting Manual page 49

1.TROUBLESHOOTING FOR THE HARDWARE
3
Press the buttons on both sides of the staple
cartridge to open the cover.
4
Pull out the empty staple case.
5
Fit the new staple case into the staple cartridge.
Push the staple case into the cartridge until it clicks.
In this step, do not remove the seal bundling the staples.
6
Pull out the seal bundling the staples straight. Then
close the cover.
7
Fit the staple cartridge into the stapler.
Insert the staple cartridge until you hear a click sound (the staple
cartridge is latched). Then lower the lever slightly.
1 TROUBLESHOOTING FOR THE HARDWARE
2
2
Refilling With Staples
1
1
47