Refilling With Staples; Refilling Finisher Staples - Toshiba e-STUDIO 206L Troubleshooting Manual

1 TROUBLESHOOTING FOR THE HARDWARE

Refilling With Staples

Refill with staples according to the following procedures when the staples in the stapler of the finisher and saddle stitch
unit run out.
 P.68 "Refilling finisher staples"
 P.72 "Refilling Saddle Stitch unit staples"
 Refilling finisher staples
 Finisher MJ-1101 / MJ-1106
1 Open the front cover of the finisher.
An illustration of MJ-1101 is given in the right-hand figure.
2 Remove the staple cartridge.
3 Take the empty staple case out of the staple cartridge.
Pull up the empty staple case while pushing both sides as shown in the
figure.
4 Fit a new staple case on the staple cartridge.
Push the staple case hook into the staple cartridge socket until you
hear a click.
68

Refilling With Staples