Refilling With Staples; Refilling Finisher Staples - Toshiba e-studio 207l Troubleshooting Manual

Refilling With Staples

Refill with staples according to the following procedures when the staples in the stapler of the finisher and
saddle stitch unit run out.
 P.67 "Refilling finisher staples"
 P.71 "Refilling Saddle Stitch unit staples"
 Refilling finisher staples
 Finisher MJ-1107 / MJ-1108
Open the front cover of the finisher.
1
An illustration of MJ-1107 is given in the right-hand figure.
Remove the staple cartridge.
2
Take the empty staple case out of the staple cartridge.
3
Pull up the empty staple case while pushing both sides as
shown in the figure.
Fit a new staple case on the staple cartridge.
4
Push the staple case hook into the staple cartridge socket until
you hear a click.
1 TROUBLESHOOTING FOR THE HARDWARE

Refilling With Staples

67