1 TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Misfeed
Locating a paper misfeed
The equipment stops copying when the original or copy paper is misfed. Paper misfeeds are notified on the touch panel as
follows:
The paper misfeed symbol helps you locate the paper misfeed.
1
13
12
11
1. Reversing Automatic Document Feeder (lower) ( P.16)
2. Reversing Automatic Document Feeder (upper) ( P.17)
3. Fuser unit ( P.23)
4. Automatic duplexing unit ( P.22)
5. Bypass tray ( P.21)
6. Drawer feeding portion ( P.18)
7. Large Capacity Feeder ( P.19) or Paper Feed Pedestal ( P.19)
8. Paper transport path ( P.23)
9. Drawers ( P.20) or drawer of the Large Capacity Feeder ( P.20)
10. Bridge Kit ( P.25)
11. Hole Punch Unit ( P.25, P.29, P.37)
12. Saddle stitch unit ( P.32)
13. Finisher ( P.25, P.29, P.37)
The picture of the hardware device shown on the touch panel differs depending on the finisher options installed.
14
Clearing a Paper Misfeed
Paper misfeed symbols
2
3
4
5
10
9
8
7
6
Error code
Error message
Guidance for
clearing paper misfeeds