Operation; Control Panel Operation; Menu Map - Chauvet Intimidator User Manual

4. O
PERATION
Control Panel

Operation

Menu Map

Intimidator™ Spot 100 IRC User Manual
To access the control panel functions, use the four buttons located underneath the
display.
Button
<MODE/ESC> Selects an operation mode or backs out of the current menu option
<UP> Scrolls up the list of options or selects a higher value
<DOWN> Scrolls down the list of options or selects a lower value
<ENTER> Activates a menu option or a selected value
Mode Programming Steps
DMX Mode d001—d512
SLAV (Son)
NASL (SLoU)
NAFA (FASt)
NStS (Srun)
NodE
NoSP
NoSE
Operating
Mode
NSti
Gobo
GoSP
CoSP
Pan
Tilt
Display
Channel
Mode
Manual Pan
Range
Manual Tilt
Range
Temperature
Display
Reset
Load
While in NSti mode, the Intimidator™ 100 IRC also responds to the IRC. When
using the IRC in this mode, changes in programming levels and settings will show
on the display.
Function
Description
Selects the DMX starting address
Slave operating mode
Automatic mode, slow program
Automatic mode, fast program
Sound-Active mode
Soun Sound-Active movement macro
Auto Automatic movement macro
000—255 Movement macro speed, fast to slow
00—09 Sound sensitivity, high to low
NoPr 01—09 Movement macro 1—9
on LED on
LEd
oFF LED off
diMM 000—255 Dimmer, 0—100%
SHut 00—20 Strobe, 0—20 Hz
00—09 Selects gobo
000—100 Sets gobo cycle effect speed, slow to fast
CoLr 00—09 Selects color
Sets color cycling rainbow effect speed,
000—100
slow to fast
PAn Normal pan operation
rPAn Inverse pan operation
tit Normal tilt operation
rtit Inverse tilt operation
diS Normal display
rdiS Inverse display
6-CH Selects the 6-channel DMX personality
11CH Selects the 11-channel DMX personality
PA54 Selects the 540° pan angle range
PA36 Selects the 360° pan angle range
PA18 Selects the 180° pan angle range
ti27 Selects the 270° tilt angle range
ti18 Selects the 180° tilt angle range
ti 9 Selects the 90° tilt angle range
tC__ Displays LED temperature
rESt Resets fixture
LoAd Load factory defaults
Page 9 of 20