Operation; Control Panel Operation; Menu Map; Configuration (Dmx) - Chauvet Intimidator Beam LED 350 User Manual

4. O
PERATION
Control Panel

Operation

Menu Map

Operation Modes
Movement Speed
Configuration
(DMX)
Page 10 of 20
To access the control panel functions, use the four buttons located underneath the
display.
Button
<MODE/ESC>
Selects an operation mode or backs out of the current menu option
<UP>
Scrolls up the list of options or selects a higher value
<DOWN>
Scrolls down the list of options or selects a lower value
<ENTER>
Activates a menu option or a selected value
Main Level Programming Levels
DMX Address
Normal Pan
Pan
Inverse Pan
Normal Tilt
Tilt
Inverse Tilt
Normal
Display
Display
Inverse
Display
14-Channel
Mode
Channel Mode
8-Channel
Mode
Pan 540°
Pan Range Pan 360°
Pan 180°
Tilt 270°
Tilt Range Tilt 180°
Tilt 90°
Reset
Load
nOUS
Set the product in DMX mode to control with a DMX controller.
1. Connect the product to a suitable power outlet.
2. Turn the product on.
3. Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
Function
d001–d512
Sets the DMX starting address
SLAv (Son) Slave operating mode
nASL (SLoU) Automatic mode, slow program
nAFA (FASt)
Automatic mode, fast program
nStS (SrUn) Sound-Active mode
PAn
Normal pan operation
Inverse pan operation
rPAn
tit
Normal tilt operation
Inverse tilt operation
rtit
diS
Changes the LCD display text position
rdiS
14CH
Selects the DMX personality
8CH
PA54
PA36
Selects pan range
PA18
ti27
ti18 Selects tilt range
ti 9
rESt Resets fixture
LoAd Loads factory defaults
inS
Increasing speed
dES Decreasing speed
Intimidator Beam LED 350 User Manual Rev. 4
Description