Chauvet Intimidator Beam LED 350 User Manual
  1. Manuals
  2. Brands
  3. Chauvet Manuals
  4. Spotlight
  5. Intimidator Beam LED 350
  6. User manual

Chauvet Intimidator Beam LED 350 User Manual

Hide thumbs Also See for Intimidator Beam LED 350:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual, Quick Reference Manual
User Manual

Advertisement

Table of Contents
loading

Related Manuals for Chauvet Intimidator Beam LED 350

Summary of Contents for Chauvet Intimidator Beam LED 350

  • Page 1 User Manual...

  • Page 2: Table Of Contents

    Master/Slave Mode ..........................16 Movement Speed ............................ 16 Reset Software ............................16 5. Technical Information ....................17 Product Maintenance ........................17 6. Technical Specifications ....................18 Returns ..........................19 Contact Us .........................20 Page 2 of 20 Intimidator Beam LED 350 User Manual Rev. 4...

  • Page 3: Before You Begin

    Chauvet reserves the right to revise the content of this document without any obligation to notify any person or company of such revision, however, Chauvet has no obligation to make, and does not commit to make, any such revisions.

  • Page 4: Product At A Glance

    · Keep this User Manual for future use. If you sell the product, give this document to the next owner. Page 4 of 20 Intimidator Beam LED 350 User Manual Rev. 4...

  • Page 5: Introduction

    2. I NTRODUCTION Overview Power In Fuse Holder DMX In/Out Power Out Safety Loop LED Display Intimidator Beam LED 350 User Manual Rev. 4 Page 5 of 20...

  • Page 6: Dimensions

    Dimensions 18.5 in (470 mm) Page 6 of 20 Intimidator Beam LED 350 User Manual Rev. 4...

  • Page 7: Setup

    3. S ETUP AC Power The Intimidator Beam LED 350 has an auto-ranging power supply and it can work with an input voltage range of 100–240 VAC, 50/60 Hz. To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or...

  • Page 8: Power Linking

    Product Other Products You can power link up to 3 Intimidator Beam LED 350 units on 120 VAC or up to 7 Intimidator Beam LED 350 units on 230 VAC. The power linking diagram shown above corresponds to the North American...

  • Page 9: Mounting

    Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes. For the CHAUVET line of mounting clamps, go to www.chauvetlighting.com/cables-clamps-main.html/. Orientation The Intimidator Beam LED 350 may be mounted in any position; however, make sure adequate ventilation is provided around the product. · Rigging Before deciding on a location, always make sure there is easy access to the product for maintenance and programming.

  • Page 10: Operation

    Connect the product to a suitable power outlet. (DMX) Turn the product on. Connect a DMX cable from the DMX output of the DMX controller to the DMX input socket on the product. Page 10 of 20 Intimidator Beam LED 350 User Manual Rev. 4...

  • Page 11: Starting Address

    DMX mode uses. If you choose a starting address that is too high, you could restrict the access to some of the product’s channels. The Intimidator Beam LED 350 uses up to 14 DMX channels in 14-CH DMX mode, which defines the highest configurable address to 499.

  • Page 12: 14-Ch

    113 ó 119 Orange + Dark Blue 120 ó 127 Dark Blue + White 128 ó 191 Color cycling rainbow with increasing speed Reverse color cycling rainbow with increasing 192 ó 255 speed Page 12 of 20 Intimidator Beam LED 350 User Manual Rev. 4...
  • Page 13 013 ó 130 Prism rotation with increasing speed Prism/Frost 131 ó 247 Reverse prism rotation with increasing speed 248 ó 255 Frost effect 000 ó 255 No function No Function 000 ó 255 0–100% Dimmer Intimidator Beam LED 350 User Manual Rev. 4 Page 13 of 20...
  • Page 14 184 ó 199 Sound-controlled program 4 200 ó 215 Sound-controlled program 5 216 ó 231 Sound-controlled program 6 232 ó 247 Sound-controlled program 7 248 ó 255 Sound-controlled program 8 Page 14 of 20 Intimidator Beam LED 350 User Manual Rev. 4...

  • Page 15: Configuration (Standalone)

    Press <MODE/ESC> repeatedly until ti27, ti18, or ti 9 shows on the display. Press <UP> or <DOWN> to select ti27 (270°), ti18 (180°), or ti 9 (90°). Press <ENTER>. Intimidator Beam LED 350 User Manual Rev. 4 Page 15 of 20...

  • Page 16: Display

    Master/Slave The Master/Slave mode allows a single Intimidator Beam LED 350 unit (the master) to control the actions of one or more Intimidator Beam LED 350 units (the slaves) without Mode the need of a DMX controller. The master unit will be set to operate in either Automatic or Sound-Active mode, while the slave units will be set to operate in Slave mode.

  • Page 17: Technical Information

    Gently polish the glass/transparent surfaces until they are free of haze and lint. Always dry the glass/transparent surfaces carefully after cleaning them. Do not spin the cooling fan using compressed air because you could damage it. Intimidator Beam LED 350 User Manual Rev. 4 Page 17 of 20...

  • Page 18: Technical Specifications

    104 °F (40 °C) Fan-cooled I/O Connectors Connector Type Channel Range 3-pin XLR 8, 14 Ordering Product Name Item Code UPC Number Intimidator Beam LED 350 08010569 781462209179 Page 18 of 20 Intimidator Beam LED 350 User Manual Rev. 4...

  • Page 19: Returns

    3) If you are located in Mexico, contact Chauvet Mexico. 4) If you are located in Benelux, contact Chauvet Europe BVBA. 5) If you are located in any other country, DO NOT contact Chauvet. Instead, contact your local distributor. See www.chauvetlighting.com...

  • Page 20: Contact Us

    Outside the U.S., United Kingdom, Ireland, Mexico, or Benelux contact the dealer of record. Follow their instructions to request support or to return a product. Visit our website for contact details. Page 20 of 20 Intimidator Beam LED 350 User Manual Rev. 4...

Table of Contents