Nsti Operating Mode (Cont.) - Chauvet Intimidator User Manual

NSti Operating
Mode (cont.)
Page 14 of 20
To turn the LED on or off:
1. Select LEd and press <ENTER>.
2. Use <UP> or <DOWN> to select on or oFF.
3. Press <ENTER>.
For dimmer control:
1. Select diMM and press <ENTER>.
2. Use <UP> or <DOWN> to select 000—255 (0—100%).
3. Press <ENTER>.
To set the shutter speed:
1. Select SHut and press <ENTER>.
2. Use <UP> or <DOWN> to select 0—20 (0—20 Hz).
3. Press <ENTER>.
To select the gobo:
1. Select Gobo and press <ENTER>.
2. Use <UP> or <DOWN> to select 0—09.
3. Press <ENTER>.
To set the gobo cycle effect speed:
1. Select GoSP and press <ENTER>.
2. Use <UP> or <DOWN> to select 000—100.
3. Press <ENTER>.
To select the color:
1. Select CoLr and press <ENTER>.
2. Use <UP> or <DOWN> to select 00—09.
3. Press <ENTER>.
To set the color cycling rainbow effect speed:
1. Select CoSP and press <ENTER>.
2. Use <UP> or <DOWN> to select 000—100 (slow to fast).
3. Press <ENTER>.
While in NSti mode, the Intimidator™ 100 IRC also responds to the IRC. When
using the IRC in this mode, changes in programming levels and settings will show
on the display.
Intimidator™ Spot 100 IRC User Manual