Configuration (Standalone); Sound-Active Mode; Automatic Mode; Nsti Operating Mode - Chauvet Intimidator User Manual
Spot 100 irc
Hide thumbs
Also See for Intimidator:
- Quick reference manual (136 pages) ,
- User manual (28 pages) ,
- Features & specification (1 page)
Table of Contents
Advertisement
Configuration
(Standalone)
Sound-Active
Mode
Automatic Mode
NSti Operating
Mode
Intimidator™ Spot 100 IRC User Manual
Set the product in one of the standalone modes to control without a DMX controller.
1.
Connect the product to a suitable power outlet.
Never connect a product that is operating in any standalone mode (Static,
Automatic, or Sound-Active) to a DMX string connected to a DMX controller.
Products in standalone mode may transmit DMX signals that could interfere with
the DMX signals from the controller.
To enable the Sound-Active mode, do the following:
1.
Press <MODE/ESC> repeatedly until one of the following Operating modes shows
on the display: SLAV, NASL, NAFA, NStS, NSti.
2.
Use <UP> or <DOWN> to select NStS.
3.
Press <ENTER> and Srun shows on the display.
The product will only respond to low frequencies of music (bass and drums).
To enable the Automatic mode, follow the instructions below:
1.
Press <MODE/ESC> repeatedly until one of the following shows on the display:
SLAV, NASL, NAFA, NStS, NSti.
2.
Use <UP> or <DOWN> to select NASL (slow program) or NAFA (fast program).
3.
Press <ENTER> and SLoU (slow program) or FASt (fast program) shows on the
display.
To enable the NSti Operating mode, do the following:
1.
Press <MODE/ESC> repeatedly until one of the following shows on the display:
SLAV, NASL, NAFA, NStS, NSti.
2.
Use <UP> or <DOWN> to select NSti.
3.
Press <ENTER> and NodE, NoSP, NoSE, NoPr, LEd, diMM, SHut, Gobo, GoSP,
CoLr, or SoSP show on the display.
4.
Use <UP> or <DOWN> to select the desired option as follows:
To select from the movement macro options:
1.
Select NodE and press <ENTER>.
2.
Use <UP> or <DOWN> to select Soun (Sound-Active) or Auto (Automatic).
3.
Press <ENTER>.
To select the movement macro speed:
1.
Select NoSP and press <ENTER>.
2.
Use <UP> or <DOWN> to select 000—255.
3.
Press <ENTER>.
To select the sound sensitivity:
1.
Select NoSE and press <ENTER>.
2.
Use <UP> or <DOWN> to select 00—09.
3.
Press <ENTER>.
To select the movement macro:
1.
Select NoPr and press <ENTER>.
2.
Use <UP> or <DOWN> to select 01—09.
Note: No macro is selected if you choose 00.
3.
Press <ENTER>.
Page 13 of 20
Advertisement
Table of Contents
