Mounting; Orientation; Rigging - Chauvet Intimidator User Manual

Mounting

Orientation

Rigging

Mounting Diagram
Page 8 of 20
Before mounting the product, read and follow the safety recommendations indicated in
the Safety Notes.
The Intimidator™ Spot 100 IRC may be mounted in any position; however, make sure
adequate ventilation is provided around the product.
·
Before deciding on a location, always make sure there is easy access to the product
for maintenance and programming.
·
Make sure that the structure or surface onto which you are mounting the product
can support the product's weight (see the
·
When mounting the product overhead, always use a safety cable. Mount the
product securely to a rigging point, such as an elevated platform or a truss.
·
When rigging the product onto a truss, you should use a mounting clamp of
appropriate weight capacity. The brackets have a 13-mm hole, which is appropriate
for this purpose.
·
The rubber feet also serve as floor supports. When mounting the product on the
floor, make sure that the product and cables are away from people and vehicles.
Mounting Clamp
Hanging/Mounting
Bracket
Rubber Feet (x4)
for floor mounting
Technical Specifications).
Safety Cable
Safety Loop
Intimidator™ Spot 100 IRC User Manual