Operation; Control Panel Operation; Menu Map - Chauvet Intimidator User Manual

4. O
PERATION
Control Panel

Operation

Menu Map

Intimidator™ Spot LED 450 User Manual Rev. 2
To access the control panel functions, use the four buttons located underneath the
display.
Button
<MENU> Selects an operation mode or backs out of the current menu option
<UP> Scrolls up the list of options or selects a higher value
<DOWN> Scrolls down the list of options or selects a lower value
<ENTER> Activates a menu option or a selected value
Main Level Programming Level
DMX Address
Run
Pan
Tilt
Display
Pan Angle
Tilt Angle
ADVANCED
Channel
Temp. Disp T1__, T2__, T3__
ResetSystem
Load Set
Function
Description
001–512 Sets the DMX starting address
Slave Slave operating mode
Fast Automatic mode, fast program
Slow Automatic mode, slow program
Sound Sound-Active mode
Normal Normal pan operation
Reverse Reverse pan operation
Normal Normal tilt operation
Reverse Reverse tilt operation
Bright Display backlight remains on
Display backlight turns off after 30
30Close
seconds of control panel inactivity
540 Pan angle range 540°
360 Pan angle range 360°
180 Pan angle range 180°
270 Tilt angle range 270°
180 Tilt angle range 180°
90 Tilt angle range 90°
14-channel mode
Basic 8-channel mode
Displays LED temperature
No Does not reset fixture
Ok Resets fixture
No Does not load factory defaults
Ok Loads factory defaults
Page 9 of 21