Mounting; Orientation; Rigging - Chauvet Intimidator User Manual

Mounting

Orientation

Rigging

Mounting Diagram
Page 8 of 18
Before mounting the product, read and follow the
The Intimidator™ Spot LED 150 may be mounted in any position; however, make sure
adequate ventilation is provided around the product.
·
Before deciding on a location, always make sure there is easy access to the product
for maintenance and programming purposes.
·
Make sure that the structure or surface onto which you are mounting the product
can support the product's weight. See the
manual for weight information.
·
When mounting the product overhead, always use a safety cable. Mount the
product securely to a rigging point, whether an elevated platform or a truss.
·
When rigging the product onto a truss, you should use a mounting clamp of
appropriate weight capacity. The bracket has 13 mm holes, which are appropriate
for this purpose.
·
When power linking multiple products, you must always consider the length of the
power linking cable and mount the products close enough for the cable to reach.
·
The rubber feet also serve as floor supports/allow for surface mounting. When
mounting the product on the floor, make sure that the product and cables are away
from people and vehicles.
Bracket
Attachement (x2)
Rubber Feet (x4)
Safety Loop
Attachment Point
Safety Notes.
Technical Specifications
Intimidator™ Spot LED 150 User Manual Rev. 8
section of this