Mounting; Orientation; Rigging - Chauvet Intimidator Beam LED 350 User Manual

Mounting

Orientation

Rigging

Mounting Diagram
Intimidator Beam LED 350 User Manual Rev. 4
Before mounting the product, read and follow the safety recommendations
indicated in the Safety Notes. For the CHAUVET line of mounting clamps,
go to www.chauvetlighting.com/cables-clamps-main.html/.
The Intimidator Beam LED 350 may be mounted in any position; however, make sure
adequate ventilation is provided around the product.
·
Before deciding on a location, always make sure there is easy access to the product
for maintenance and programming.
·
Make sure that the structure or surface onto which you are mounting the product
can support the product's weight (see the
·
When mounting the product overhead, always use a safety cable (such as CH-05
from CHAUVET). Mount the product securely to a rigging point, such as an elevated
platform or a truss.
·
When rigging the product onto a truss, you should use mounting clamps (such as
CLP-15 from CHAUVET) of appropriate weight capacity.
·
When power linking multiple products, you must always consider the length of the
power linking cable and mount the products close enough for the cable to reach.
·
The rubber feet also serve as floor supports. When mounting the product on the
floor, make sure that the product and cables are away from people and vehicles.
Bracket Attachment
Rubber Feet (x4)
Safety Loop Attachment Point
When using only one mounting clamp with this fixture, you must use a
clamp with a captive bolt to prevent accidental loosening.
Technical Specifications).
Page 9 of 20