Power Linking; Power Linking Diagram; Mounting; Mounting Diagram - Chauvet LFS-5D User Manual

Setup

Power Linking

Power Linking
Diagram

Mounting

Mounting
Diagram
Page 8 of 14
Power linking is daisy chaining products together through their Power In and Power Out sockets
allowing many products to be powered from one outlet.
Up to 23 LFS-5D products can be power linked at 120 V or up to 45 LFS-5D products can be
power linked at 230 V.
The diagram below illustrates power-linking.
Power Source
·
Do not power link more than 23 LFS-5D at 120 V.
·
Do not power link more than 45 LFS-5D at 230 V.
·
The power linking diagram above shows the North American version. When using
the LFS-5D anywhere other than North America, consult with the local Chauvet
distributor for information on local requirements.
Before mounting the product, read and follow the recommendations in
Mount the LFS-5D on, or from, a structure or surface that can support its weight. For the
product's weight, see Technical
When mounting the LFS-5D overhead secure it to a pipe or truss, using a mounting clamp and
safety cable, such as the CHAUVET® CLP-15 clamp and CH-05 safety cable.
Use the bracket adjustment knobs to aim the LFS-5D as desired, but loosen or tighten the
bracket knobs manually because using tools can damage the knobs.
Mounting Clamp
1st LFS-5D
Specifications.
LFS-5Ds
2nd LFS-5D
Safety Notes.
Safety Cable
Bracket Adjustment Knob (x2)
LFS-5D User Manual Rev. 1
Other