Mounting; Orientation; Rigging - Chauvet Intimidator Spot LED 250 User Manual

Mounting

Orientation

Rigging

Mounting Diagram
Intimidator™ Spot LED 250 User Manual (Rev. 03)
Before mounting the product, read and follow the safety recommendations indicated in
the Safety Notes section (page 2 of this manual).
The Intimidator™ Spot LED 250 may be mounted in any position; however, make sure
adequate ventilation is provided around the product.
 Before deciding on a location for the product, always make sure there is easy
access to the product for maintenance and programming purposes.
 Make sure that the structure or surface onto which you are mounting the product
can support the product's weight. Please see the Technical Specifications section of
this manual for weight information.
 When mounting the product overhead, always use a safety cable. Mount the
product securely to a rigging point, whether an elevated platform or a truss.
 When rigging the product onto a truss, you should use a mounting clamp of
appropriate weight capacity. The bracket has a 13 mm hole, which is appropriate for
this purpose.
 When power linking multiple products, you must always consider the length of the
power linking cable and mount the products close enough for the cable to reach.
 The rubber feet also serve as floor supports. When mounting the product on the
floor, make sure that the product and cables are away from people and vehicles.
Bracket
Attachment (x2)
Rubber Feet (x4)
Safety Loop
Attachment Point
Page 9 of 26