Register A New Handset - Doro ARC 3 Manual

Expanded system (Two or more handsets e.g +1...)
The call number for internal calls will be shown in the display in standby mode. The base unit should be positioned
centrally so that the coverage area is roughly equal for all handsets.
Intercom / internal call
1. Press
(right menu button).
2. If using more than 2 handsets: Enter call number
A tone will be heard if an external call comes in while an internal call is in progress. End the internal call with
and then answer the external call with
Transferring calls/Conference between handsets
When an external call is connected;
1. Press
. Scroll to INTERCOM. Press OK.
2. If using more than 2 handsets: Enter call number
3. To transfer: press
L

Register a new handset

All handsets included in the package are already registered to the base unit.
Only for separate handsets/service measures.
You can register up to 6 handsets to one base unit.
This model is GAP (Generic Access Profile) compatible, which means that the handset and the base unit can both be used with most other GAP
compatible units irrespective of manufacturer. However the GAP protocol cannot guarantee that all functions may be accessed. Extra handsets will
not be available as accessories.
1. Hold down on the base for around 6 seconds.
J
2. Press
. Scroll to REGISTRATION. Press OK.
3. Enter the base unit's PIN code (e.g. 0000). Press OK.
4. If the registration is successful the unit will return to standby mode within one minute.
.
q
, �or conference: hold
English
- for the desired handset or press
1 6
- for the desired handset or press
1 6
pressed down.
*

for all.
9
L
for all.
9