ZyXEL Communications P-660HNU-F1 User Manual page 75

Class Name
To Queue
From Interface
Ether Type
Source - MAC Address
Source - IP Address
Source - Port Range
Destination - Port
Range
IP Protocol
This maps e-mail traffic to queue 7 created in the previous screen (see the To Queue field). This
also maps your computer's IP address and MAC address to queue 7 (see the Source fields).
Verify that the queue setup works by checking Network Setting > QoS > Monitor. This shows
4
the bandwidth allotted to e-mail traffic compared to other network traffic.
ADSL Series User's Guide
Give a class name to this traffic, such as Email in this example.
Link this to a queue created in the QoS > Queue Setup screen, which is the Email
queue created in this example.
This is the interface from which the traffic will be coming from. Select Lan.
Select IP to identify the traffic source by its IP address or MAC address.
Type the MAC address of your computer - AA:FF:AA:FF:AA:FF. Type the MAC Mask
if you know it.
Type the IP address of your computer - 192.168.1.23. Type the IP Subnet Mask if
you know it.
Set the port range to 25 ~ 25.
Set the port range to 25 ~ 25.
Select this to make the source and destination Port Range fields available. Set the
protocol to TCP.
Chapter 3 Tutorials
75