ZyXEL Communications P-660HNU-F1 User Manual page 249

Reset the device to its factory defaults, and try to access the ZyXEL Device with the default IP
4
address. See
If the problem continues, contact the network administrator or vendor, or try one of the advanced
5
suggestions.
Advanced Suggestions
• Try to access the ZyXEL Device using another service, such as Telnet. If you can access the
ZyXEL Device, check the remote management settings and firewall rules to find out why the
ZyXEL Device does not respond to HTTP.
• If your computer is connected to the WAN port or is connected wirelessly, use a computer that is
connected to an ETHERNET port.
I can see the Login screen, but I cannot log in to the ZyXEL Device.
Make sure you have entered the user name and password correctly. The default user name is
1
admin. These fields are case-sensitive, so make sure [Caps Lock] is not on.
You cannot log in to the web configurator while someone is using Telnet to access the ZyXEL Device.
2
Log out of the ZyXEL Device in the other session, or ask the person who is logged in to log out.
Turn the ZyXEL Device off, wait for one minute and turn it back on.
3
If this does not work, you have to reset the device to its factory defaults. See
4
247.
I cannot telnet to the ZyXEL Device.
See the troubleshooting suggestions for
configurator.
I cannot use FTP to upload / download the configuration file. / I cannot use FTP to upload
new firmware.
See the troubleshooting suggestions for
configurator.
ADSL Series User's Guide
Section 1.6 on page 25.
Ignore the suggestions about your browser.
Ignore the suggestions about your browser.
I cannot see or access the Login screen in the web
I cannot see or access the Login screen in the web
Chapter 26 Troubleshooting
Section 26.2 on page
249