ZyXEL Communications P-660HNU-F1 User Manual page 31

Table 1 Navigation Panel Summary
LINK
QoS
NAT
Dynamic DNS
Security
Firewall
MAC Filter
Certificates
VPN
System Monitor
Traffic Status
Maintenance
Users Account
Remote MGMT
System
Time Setting
Log Setting
Firmware
Upgrade
Backup/Restore
ADSL Series User's Guide
TAB FUNCTION
General Use this screen to enable QoS and decide allowable bandwidth
using QoS.
Queue Setup Use this screen to configure QoS queue assignment.
Class Setup Use this screen to set up classifiers to sort traffic into different
flows and assign priority and define actions to be performed for a
classified traffic flow.
Monitor Use this screen to view each queue's statistics.
Port Forwarding Use this screen to make your local servers visible to the outside
world.
Sessions Use this screen to limit the number of NAT sessions a single client
can establish.
Dynamic DNS Use this screen to allow a static hostname alias for a dynamic IP
address.
General Use this screen to activate/deactivate the firewall.
Services Use this screen to set the default action to take on network traffic
going in specific directions.
MAC Filter Use this screen to allow specific devices to access the ZyXEL
Device.
Local Certificates Use this screen to generate and export self-signed certificates or
certification requests and import the ZyXEL Device's CA-signed
certificates.
Trusted CAs Use this screen to save CA certificates to the ZyXEL Device.
VPN Certificates Use this screen to import certificates and privates keys for VPN.
Up to 4 certificates can be stored.
Setup Use this screen to manage VPN settings
Monitor This page will show you the active tunnel's status
WAN Use this screen to view the status of all network traffic going
through the WAN port of the ZyXEL Device.
LAN Use this screen to view the status of all network traffic going
through the LAN ports of the ZyXEL Device.
NAT Use this screen to view the status of NAT sessions on the ZyXEL
Device.
Users Account Use this screen to configure the passwords your user accounts.
Remote MGMT Use this screen to enable specific traffic directions for network
services.
System Use this screen to configure the ZyXEL Device's name, domain
name, management inactivity time-out.
Time Setting Use this screen to change your ZyXEL Device's time and date.
Log Setting Use this screen to select which logs and/or immediate alerts your
device is to record. You can also set it to e-mail the logs to you.
Firmware Upgrade Use this screen to upload firmware to your device.
Backup/Restore Use this screen to backup and restore your device's configuration
(settings) or reset the factory default settings.
Chapter 2 Introducing the Web Configurator
31