The Upnp Screen - ZyXEL Communications P-660HNU-F1 User Manual

Table 28 Network Setting > Home Networking > Static DHCP (continued)
LABEL
MAC Address
IP Address
Reserve
Apply
Cancel
Refresh
If you click Add new static lease in the Static DHCP screen, the following screen displays.
Figure 47 Static DHCP: Add
The following table describes the labels in this screen.
Table 29 Static DHCP: Add
LABEL
MAC Address
IP Address
Apply
Back

7.4 The UPnP Screen

Universal Plug and Play (UPnP) is a distributed, open networking standard that uses TCP/IP for
simple peer-to-peer network connectivity between devices. A UPnP device can dynamically join a
network, obtain an IP address, convey its capabilities and learn about other devices on the network.
In turn, a device can leave a network smoothly and automatically when it is no longer in use.
See page 148
Use the following screen to configure the UPnP settings on your ZyXEL Device. Click Network
Setting > Home Networking > UPnP to display the screen shown next.
ADSL Series User's Guide
DESCRIPTION
The MAC (Media Access Control) or Ethernet address on a LAN (Local Area Network) is
unique to your computer (six pairs of hexadecimal notation).
A network interface card such as an Ethernet adapter has a hardwired address that is
assigned at the factory. This address follows an industry standard that ensures no other
adapter has a similar address.
This field displays the IP address relative to the # field listed above.
Select the check box in the heading row to automatically select all check boxes or
select the check box(es) in each entry to have the ZyXEL Device always assign the
selected entry(ies)'s IP address(es) to the corresponding MAC address(es) (and host
name(s)). You can select up to 128 entries in this table.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
Click Refresh to reload the DHCP table.
DESCRIPTION
Enter the MAC address of a computer on your LAN.
Enter the IP address that you want to assign to the computer on your LAN with the MAC
address that you will also specify.
Click Apply to save your changes.
Click Back to exit this screen without saving.
for more information on UPnP.
Chapter 7 Home Networking
137