Configuring The Wireless Client Using The Wps Pin Number - ZyXEL Communications P-660HNU-F1 User Manual

Chapter 3 Tutorials

3.3.4 Configuring the Wireless Client using the WPS PIN number

This section describes how to connect the wireless client to a network using the WPS PIN method.
You need to log into the Web Configurator for this.
Place a WPS-enabled device that supports the WPS PIN configuration method near the ADSL
1
Device.
Log into the ADSL Device's web configurator at http://192.168.1.1 (see
2
Configurator
In the navigation panel, click Network Setting > Wireless > WPS.
3
Select the Enable check box and click Apply to enable the WPS function.
4
Enter the PIN of the other WPS-enabled device into the Enter PIN here text box and click
5
Register. You can locate this PIN number in the other device's utility or on the device itself. See the
other device's documentation if you cannot locate the PIN.
Click Start or Apply in the other device's utility screen within two minutes of clicking Register in
6
the ADSL Device web configurator screen.
The ADSL Device and the other WPS-enabled device establish a secure connection. This can take up
7
to two minutes.
Your computer is now ready to connect to the Internet wirelessly through your ADSL Device.
8
48
on page 27 for more details on this).
Introducing the Web
ADSL Series User's Guide