ZyXEL Communications P-660HNU-F1 User Manual page 159

The following table describes the labels in this screen.
Table 38 Routing: Add/Edit
LABEL
Active
Route Name
Destination IP
Address
IP Subnet Mask
Gateway IP
Address
Bound Interface
Apply
Back
ADSL Series User's Guide
DESCRIPTION
Click this to activate this static route.
Enter the name of the IP static route. Leave this field blank to delete this static route.
This parameter specifies the IP network address of the final destination. Routing is always
based on network number. If you need to specify a route to a single host, use a subnet
mask of 255.255.255.255 in the subnet mask field to force the network number to be
identical to the host ID.
Enter the IP subnet mask here.
You can decide if you want to forward packets to a gateway IP address or a bound
interface.
If you want to configure Gateway IP Address, enter the IP address of the next-hop
gateway. The gateway is a router or switch on the same network segment as the device's
LAN or WAN port. The gateway helps forward packets to their destinations.
You can decide if you want to forward packets to a gateway IP address or a bound
interface.
If you want to configure Bound Interface, select the check box and choose an interface
through which the traffic is sent. You must have the WAN interface(s) already configured
in the Broadband screen.
Click Apply to save your changes.
Click Back to exit this screen without saving.
Chapter 8 Routing
159