Page 2
ENGLISH Introduction The P-660RU-Tx v3 is an ADSL2+ router with firewall and both Ethernet and USB ports. What You Have to Do • Install the USB driver If you want to connect a computer to the USB port, install the driver before you connect the device to the computer’s USB port.
Page 3
P-660RU-Tx v3 Connect the Hardware 1. DSL: Use a telephone wire to connect this port to a telephone jack. 2. ETHERNET: Use an Ethernet cable to connect this port to your computer’s Ethernet port. 3. USB: Use a USB cable to connect this port to your computer’s USB port.
Page 4
ENGLISH Internet Access You need your account information provided by your ISP, such as user name, password, and so on. 1. Enter the default IP address http://192.168.1.1 in your browser. Then type the user name (admin by default) and password (1234 by default) in the login screen. Click OK. 2.
Need help?
Do you have a question about the P-660RU-T1 v3 and is the answer not in the manual?
Questions and answers