Forwarding Calls - Polycom SoundPoint IP 650 User Manual

User Guide for the SoundPoint IP 650 Desktop Phone

Forwarding Calls

Note
3 - 18
Performing a Blind Transfer
To perform a blind transfer:
1. During a call, press
2. Press the Blind soft key.
3. Do one of the following steps:
— Enter the number to which you want to transfer the call.
— Refer to Placing Calls
At this point, the call is connected to the number to which you are
transferring them.
You can configure your phone so that all incoming calls are forwarded to
another party (refer to
your phone rings (refer to
You can forward all incoming calls to another party while Do Not Disturb is
enabled on your phone. For more information, contact your system
administrator.
Call Forwarding is not available on shared lines.
This feature is local to the phone, and may be overridden by call server settings.
For more information, contact your system administrator.
or the Trnsfer soft key.
on page 3-2.
Static Forwarding). You can also forward calls while
Dynamic Forwarding).