Rejecting Calls - Polycom SoundPoint IP 650 User Manual

User Guide for the SoundPoint IP 650 Desktop Phone

Rejecting Calls

Note
2 - 22
To set a distinctive ring type for a contact:
1. Press
2. Select Contact Directory.
3. Use and
You can also use the * key to page up and the # key to page down.
4. Press the Edit soft key, and then scroll down to the Ring Type field.
5. Enter the number corresponding to one of the ring types available.
For more information, refer to
6. (Optional.) To remove an existing value, press
7. Press the Save or Cancel soft keys to accept or cancel changes.
8. Press
You can customize your phone so that incoming calls from a particular party
are immediately sent to your voice mail.
Rejecting calls is not available on shared lines.
To send incoming calls from a contact directly to voice mail:
1. Press
2. Select Contact Directory.
3. Use and
You can also use the * key to page up and the # key to page down.
.
to highlight the contact.
Selecting the Ring Type
to return to the idle display.
.
to highlight the contact.
on page 2-8.
.