Adjusting The Display Contrast; Adjusting The Backlight; Placing Calls - Polycom SoundPoint IP 650 User Manual

Adjusting the Display Contrast

Adjusting the Backlight

Placing Calls

Item
3 Line Indicators
4 Graphic Display
5 Infrared Lens
To adjust the display contrast on a SoundPoint IP Backlit Expansion Module,
refer to Changing the Display Contrast
To adjust the backlight on a SoundPoint IP Backlit Expansion Module, refer to
Changing the Backlight Intensity
When you connect a SoundPoint IP Backlit Expansion Module to your phone,
you can place a call using one of the Line Keys.
Using the SoundPoint IP Backlit Expansion Module
Description
Individual multi-color LEDs display
the dynamic call state and remote
user status (busy lamp field [BLF] and
presence). The mapping is:
Solid green—An active call is in
progress.
Fast flashing green—There is an
incoming (ringing) call.
Flashing green—Another party has
put you on hold.
Flashing red—The call is on hold.
Solid red—The line is busy remotely
(shared lines).
Shows information about lines or
speed dials.
Facilitates communications to the
host phone and other Expansion
Modules.
on page 2-3.
on page 2-4.
5 - 5