Troubleshooting; No Dial Tone; Does Not Ring; Flickering Lcd - Polycom SoundStation2 User Manual/Administrator Manual

Troubleshooting

No Dial Tone

The telephone cable must be plugged into an analog
telephone jack. If the dial tone is not heard, verify the
following:
► Check that the console is opera-
tional.

Does Not Ring

Check that the ringer is not turned off.
See "Ring Type", page 12.

Flickering LCD

If your screen appears to icker, it
may be because you are using a cer-
tain type of orescent lighting in your

Keypad Input Doesn't Register

This could happen if you enter infor-
mation too quickly. Press the alphanu-
meric buttons slowly.
Muffled or "in a well" Reception
This is caused by highly reverberant rooms and people
speaking too far from the microphone.
Speak closer to the console so that the
microphones pick up your speech more
accurately.
► Check that the telephone cable
from the interface module is
connected to an analog telephone
(POTS) line.
► If the volume is turned all the
way down, increase the volume
with the Volume buttons.
building. Move the SoundStation2™
away from the lights or replace the
orescent bulbs.
Some buttons may not be recognized
if you press them too quickly.
Add more sound absorbency to
►
the room.
SoundStation2 User Guide - 20