Phone System - Polycom SoundStation2 User Manual/Administrator Manual

Phone System

Caller ID*
You can congure Caller ID according to the specica-
tions and standards that pertain to the phone line you
are connecting to. Standards may differ from country
to country. Please refer to Appendix A for additional
information.
1. Press the Menu button
choose Admin Setup and press the
Select button
(if required) and press the
key. Choose Phone System using
the Scrolling buttons
the Select button
2. Choose CallerID from the available
options and press the Select button
.
3. Use the <- and -> soft keys to step
through the available Caller ID op-
tions.
SAVE
4. Press the
button
You may press the Exit button
to cancel your entry.
Flash Timing
You can adjust the timing of the Flash delay to 75, 100,
300, or 600 milliseconds.
1. Press the Menu button
choose Admin Setup and press
the Select button
passcode (if required) and press the
ENTER
soft key. Choose Flash Tim -
ing using the Scrolling buttons
and press the Select button
2. Choose Flash Timing from the
available options and press the
Select button
3. Use the <- and -> soft keys to step
through the available Flash Timing
options.
,
, enter passcode
ENTER
, and press
.
soft key or the Select
to save your entry.
,
, enter the
.
SoundStation2 Administrator Guide - 28
soft
*Caller ID is a subscription
service. Check with your local
telephone service provider to de-
termine if this service is available
in your area.
4. Press the
changes. You may press the
Exit button
your selection.
,
.
SAVE
soft key to save
to cancel