Passcode - Polycom SoundStation2 User Manual/Administrator Manual

Passcode

When you select Passcode from the Admin Setup menu,
the screen will display whether or not a passcode is cur-
rently assigned.
Assign a passcode:
1. Press the Menu button
choose Admin Setup using the
Scrolling buttons
the Select button
Passcode using the Scrolling but-
tons , and press the Select
button
ASSIGN
2. Press the
a three-digit password. If you
make an error, press the
key to erase the error.
SAVE
3. Press the
CANCEL
press the
Exit button
to save the passcode.
►Record the passcode. If the passcode is forgotten,
contact Polycom Support at www.polycom.com/support
and click on "How to Contact Support and Service" for
your local support contact information.
Remove a passcode:
Removing the passcode removes the requirement for an
access passcode for the Admin Setup menu.
1. From the Admin Setup menu,
choose Passcode using the Scrolling
buttons
ton .
REMOVE
2. Press the
the current passcode, and press the
ENTER
soft key. If you decide not to
remove the password, press the
CEL
soft key or the Exit button
►If you enter an incorrect pass-
word, you will be notied to try
again.
►If you make an error, press the
<DEL
soft key to erase the error.
,
, and press
. Choose
.
soft key and enter

<DEL
soft key. You may
soft key or the
if you choose not
and press the Select but-
soft key, enter
SoundStation2 Administrator Guide - 25
soft
CAN -
.
INCORRECT PASSCODE