Page 2
Skype, you could connect your desktop computer or laptop to the SoundStation2 or SoundStation2W using Polycom’s Computer Calling cable. The speaker and microphones of the Polycom conference phone can then be used to include everyone in the conference room or office in the conversation. In this mode the call is traveling over the Internet.
Page 3
To connect the SoundStation2 or SoundStation2W to your desktop computer or laptop, please connect the Computer Calling cable to your sound card in the following manner: The single BLACK connector on the Computer Calling cable is plugged into the 2.5 mm input/output jack on the side of the SoundStation2 or SoundStation2W. (See above.) The GREEN connector on the Computer Calling cable plugs into the LINE OUT jack on your desktop computer or laptop.
Page 4
• The base station does not have to be powered up to use the SoundStation2W™ in this mode. • Voice quality may vary depending on the network connection, application type and computer model. • The application interface on your desktop computer or laptop is used for all dialing and call management functions when using the Computer Calling Kit.
Page 5
Select the Audio tab and adjust the Sound Playback volume. (See below.) Select the Audio tab and adjust the Sound Recording volume.
Page 6
Note : If the far end can not hear you clearly when using the SoundStation2, it may be necessary to activate microphone boost. Click on the Advanced button under the Microphone slider and then make sure the “MIC boost” option is enabled. If there is no audio from the SoundStation2™...
Need help?
Do you have a question about the SoundStation 2 and is the answer not in the manual?
Questions and answers