Using Soundstation2; Placing A Call; Answering A Call; Answering A Second Call - Polycom SoundStation2 User Manual/Administrator Manual

Using SoundStation2

Placing a Call

SoundStation2 allows you to place a call over an analog
line. Several methods are available to initiate a call.
Direct Dial
1. To obtain dial tone, press the
key.
2. Dial the desired number.
► To cancel the call, press the
key.

Answering a Call

Press the key or any number key
to answer an incoming call. Pressing
the button will override all other
telephone activity. The three LEDs will
blink green when the phone rings.

Answering a Second Call

If you are on a call when another call is
received, you will hear a Call Waiting
tone.
► Press the Conference button
to answer the incoming call.
This rst call will be automati-
cally placed on hold.

Ending a Call

To end a call, press the
C onnection D iagram
key.
SoundStation2 User Guide - 9
Indirect Dial
1. From the Ready screen, dial the
desired number.
2. Press the
soft key to make the call.
► If you make a mistake entering
the telephone number, press the
<DEL
soft key.
CANCEL
► Press the
cancel the call.
► Switch back and forth between
calls using the conference but-
ton .
The Call waiting feature may not
be available on your telephone line.
Check with your telephone system
administrator or service provider.
SEND
key or the
SEND
OR
soft key to