No Signal; Troubleshooting - Polycom Soundstation 2W User And Administrator Manual

Troubleshooting

No Signal

► Check that the base station is
powered up.
► Make sure that the console is not
out of the allowed range (150
feet).
No Dial Tone
► Check that the base is powered
on.
Does Not Ring
► Check that the ringer is not turned
off. See "Ringer Type", page XX.
► If the volume is turned all the way
down, increase the volume with the
Volume Up/Down button.
Flickering LCD
If your screen appears to flicker, it may
be because you are using a certain type
of florescent lighting in your building.
Keypad Input Doesn't Register
This could happen if you input informa-
tion too quickly. Press the alphanumeric
buttons slowly.
Muffled or "in a well" Recep-
tion
This is caused by highly reverberant
rooms and people speaking too far from
the microphone.
► Speak closer to the unit so that
the microphones pick up your
► If the console and base station
► Check that the base is con-
Move the SoundStation® 2W away
from the lights or replace the flores-
cent bulbs.
Due to system responsiveness, some
buttons may not be recognized if you
press them too quickly.
SoundStation 2W User Guide - 16
®
are separated by multiple brick
walls, this will reduce the avail-
able range bettween the base
and console.
nected to an analag telephone
(POTS) line.
► Make sure that the console
speaker is enabled. See ??,
page XX.
speech more accurately.
► Add more sound absorbency
to the room.